Sản phẩm
Thiết bị đo kiểm chất lượng mạng
Đo mạng truy nhập
Đo kiểm CATV băng rộng
Đo truyền dẫn đường trục/Quang
Phân tích giao thức
Thiết bị truy nhập
Next Generation Access Network
Broad Bank CPE
Hệ thống nguồn điện
Access Power Solution
Network Power Solution
Large Power Solution
Vật tư phụ kiện
Dụng cụ thi công feeder
Cáp viễn thông
Cáp quang
Connector/Phối hợp trở kháng
RF Connector
Cabling products

Thư viện

    Hình ảnh hoạt động
    Hình ảnh nhà máy
    Trưng bày sản phẩm
    Download
Số lượt truy cập : 330464
Số người trực tuyến : 20

Developed by VINNO JSC

 
 
LP100
  The LP100 Leakage Profiler is a new wireless solution that lets users check for, locate and measure signal leakage as well as perform FCC-required leakage measurements at the drop or at any network location.

LP100 LEAKAGE PROFILER

Unique new leading-edge technology 
makes locating and measuring leakage faster,
easier and more accurate than ever before

  Data Sheet (pdf, 115KB)
  IP Series Information

The LP100 Leakage Profiler from Sunrise Telecom Broadband is a new wireless solution that lets users check for, locate and measure signal leakage as well as perform FCC-required leakage measurements at the drop or at any network location. Used in conjunction with any CM series meter with the CM-W wireless option, the LP100 is easy-to-use and provides comprehensive leakage detection and analysis.

It’s simple - no more juggling back and forth between various testing devices, no more physical connections to make or cables to untangle. The LP100 features a calibrated standard dipole antenna, a calibrated collapsed dipole and highly sensitive leakage receiver. Leakage data is quickly transmitted over a wireless link and is displayed on the Install Profiler. Measurements of the current leakage level, the peak leakage level and the programmed leakage limit are provided on the high-resolution, color display in both numeric and graphic formats.

  • Calibrated dipole for FCC leakage tests

  • Easy-to-use wireless design (no cable)

  • Compact 12" calibrated "collapsed" mode for use in buildings

  • Save measurement results along with the drop performance data

  • Locator tone to facilitate locating leakage

  • Limit, peak-hold and instantaneous leakage measurements - all displayed simultaneously

  • Compatible with common signal tagging

The LP100 has high sensitivity detection with capabilities of 0.5 µV/M, making even minor leaks detectable—even in harsh RF environments and near transmitters. Tagging detection capabilities allow detection with multiple operators. The LP100 offers frequency agile tuning from 120 MHz to 140 MHz, automated alarms, peak hold measurements, a leakage locator tone and a unique signal identification trigger system.

Locating Leakage

The collapsible dipole antenna is calibrated in both the extended and collapsed modes. The extended mode is used for FCC-approved measurements and the collapsed mode locates and measures leakage in restricted space areas like hallways, congested urban sidewalks and maintenance closets.

The LP100’s alarm emits a tone whose frequency is proportional to the signal level measured, thus the user can pay attention to the environment while moving towards the source of leakage and orientating the antenna for the maximum frequency tone—all without ever looking at the Install Profiler’s display. The Peak Hold feature on the Install Profiler will automatically capture the peak leakage signal level measurement.

Identifying Leakage

The LP100 offers three modes of signal identification, providing the maximum in flexibility for monitoring leakage from any network - AM tagged, FM tagged or standard analog signals. Tagging may be used to identify and differentiate the desired signal from those on adjacent or overbuilt networks. The LP100 is compatible with AM modulated tagging systems with modulation from 5 to 30 Hz and with FM modulation - simply select the type of modulation in the setup screen.

Alarm Modes

The LP100 provides an alarm mode that squelches the audio tone off until the leakage signal level reaches the programmed alarm limit. The limit is programmable using the optional PC-IP software or is adjustable in the user’s setup screen on the Install Profiler.

 

Measuring Leakage

The LP100 offers exceptional sensitivity, selectivity and discrimination between signals through use of an exclusive DSP process that provides exceptional identification and accuracy in measurement of the desired signal. The peak hold feature on the Install Profiler automatically captures the peak leakage signal level measurement, helping to eliminate the possibility of user error. The Install Profiler’s high-resolution, color display provides both an analog and digital readout of the measurement results. Measurements above the Limit setting are displayed in RED.

Summary

The LP100 Leakage Profiler is an efficient, flexible, timesaving, solution to ensuring acceptable leakage performance. Used in conjunction with the Install Profiler series, the device provides comprehensive data to help correct leakage problems, document installations and provide FCC conformance data. For more information, contact your Sunrise Telecom Broadband sales representative or call 1-514-725-6652 or toll-free 1-800-297-9726 in North America. 

Operation Requirements

The CM-W wireless interface option is required on the CM series meter for operation with the LP100. The LP100 may be used to detect and locate leakage independently of the meter, but a meter is required for setup and level measurements. The wireless option requires factory installation.

 

         

 

 


 

 
 
Relate Product
 
 
Tìm Kiếm
Thăm dò
 Bạn có thấy hài lòng với kết quả tìm kiếm sản phẩm và dịch vụ của chúng tôi không ?
KHÔNG
 
Đối tác
Sunrise Telecom Inc
Radiall
AC&E Australia
Eaton
AMA Product Pte Ltd
Tin tức
Thông báo về việc chuyển trụ sở của CSC Telecom....
- CSC Telecom sẽ chính thức áp dụng hệ thống quản lý chất lượng ISO 9001.2000 từ đầu năm 2008